- Information
- Reviews
Product information
LiquiFuse Glue 4oz (113ml)
A little bit goes a long way!
Papyros Liquifuse provides a strong, pure bond that is colourless. It burns off completely during firing without unpleasant odours or leaving residue marks on the glass.
What it does:
LiquiFuse Thin Viscosity is designed to flow into tight spaces using capillary action, making it ideal for securing dry‑positioned glass design elements before firing.
- Prepare the Bottle
Unscrew the applicator tip.
Remove the red stopper.
Use a craft knife to cut 1/16" (2 mm) off the tip at a slight angle.
- Apply the Adhesive
Dry-position your design pieces on the base glass.
Place one small drop of LiquiFuse on the edge of a design piece.
Capillary action will pull the adhesive between the piece and the base glass.
Make any final adjustments—LiquiFuse provides a temporary hold.
- Before Firing
Allow the adhesive to set for at least 15 minutes before moving the project to the kiln.
- For Frit & Stringer Designs
Dry-position your small pieces first.
Apply small drops carefully to secure them to the base glass using the same capillary process.
TIP - Do not use an excessive amount as it can show up after firing (especially on opaque glass)
