Long 1" x 2 1/2" Super Duty Stand-Off
1” diameter stand-offs are used on medium sized pieces of glass between 12” & 15” in scale. If the artwork is over ½” thick or depth greater than 6” then choose a 1½” diameter stand-off.
The original super duty stand-off is a non-drilling hardware and has been a popular style. The original super duty stand-offs was designed for the glassblower who can have larger heavier pieces with only one attachment point and it is orientated on the piece of glass in which the glass will always display with a particular design at the top. The super duty stand-off has a streamlined design in which no screws are visible once the stand-off is placed into the bracket on the wall. This stand-off can have up to a 1 1/2″ surface area and a no flex bracket.
Original super duty stand-offs is typically used one stand-off per piece of artwork. This is a streamlined system with no screws showing and no flex in the bracket. This stand-off is orientated on the artwork designating a “top” and “bottom”. Additional angles can be achieved by rotating the bracket.