CGG Decals – Busy Bees
BRAND NEW! Our new range of decals are the perfect addition to your glass fusing. The Busy Bees design features different size bees along with honeycomb.
Simply cut out your decal, soak in clean warm water, when the transfer uncurls remove from the water. Then slide the transfer from the backing paper and onto your glass. Squeegee the transfer to remove any water between the decal and the glass. Allow to dry for around 2 hours before firing.
The recommended firing temperate is between 745 - 760 C, lower temperatures enable colours to stay bright. It is recommended you full fuse your glass and then apply the decals and re-fire. Please note that when firing to higher temperatures colours will fade.
Once kiln fired these decals are permanent and will not scratch or rub off. For best results use opaque glass. Please note that these glass decals have a flux overcoat which will leave a faint line where you cut the decal.
Sheet size 210mm x 297mm each sheet contains 39 decals.
Approx decal sizes - Top bee 45mm x 30mm, honeycomb 95mm x 40mm, flying bee 45mm x 45mm, Middle bee 30mm x 20mm, honeycomb 60mm 25mm, small flying bee 30mm x 25mm, tiny bees 18mm x 15mm and small honeycomb 47mm x 20mm.