- Information
- Resources
- Reviews
Product information
CGG Decals - Tree Silhouettes
BRAND NEW! Our new range of Christmas decals are perfect for adding festive cheer to your glass fusing. The tree silhouettes design features four different tree designs in various sizes.
Simply cut out your decal, soak in clean warm water, when the transfer uncurls remove from the water. Then slide the transfer from the backing paper and onto your glass. Squeegee the transfer to remove any water between the decal and the glass. Allow to dry for around 2 hours before firing.
The recommended firing temperate is between 745 - 760 C, lower temperatures enable colours to stay bright. It is recommended you full fuse your glass and then apply the decals and re-fire. Please note that when firing to higher temperatures colours will fade.
Once kiln fired these decals are permanent and will not scratch or rub off. For best results use opaque glass. Please note that these glass decals have a flux overcoat which will leave a faint line where you cut the decal.
Sheet size 210mm x 297mm each sheet contains 21 decals.
Approx decal sizes - large trees approx. 80x50mm, medium trees approx. 35x20mm and small trees approx. 25x20mm.
- * * * * *08/09/2025
CGG Decals - Tree Silhouettes - light grey
By LisaThese are lovely size and shape and perfect for the range of projects I have in mins. Unfortunately they fired very light grey. I have tweaked the heat and fired them to 720 and also to 750 but they are still grey - I realise that every kiln is different. I will try them again at an even lower temp. The temp advice supplied is misleading
