The Creator's Handy Foiler comes in three different sizes and speeds up the foiling process for glass while keeping the foil centered.
- 1/4 inch
- 3/16 inch
- 7/32 inch
Hand Foiler instructions:
Remove all oil from glass and grind it so that the foil will stick.
Insert foil into opposite end of roller through the slot. After inserting into the slot, peel back foil approximately 3" inches from the paper. Remove 1" of the paper backing and back through until the paper is showing on the other side of the slot and is separated from the backing where the foil enters the handle. Then proceed to pull the foil up to the other end towards the roller. Guide foil underneath the roller. Now the paper backing should easily separate when you begin to foil your glass.
Grasp the foiler leaving thumb free. Insert edge of glass piece between guides on the underside of the tool.
It is important to hold the foiler stationary while rotating the piece of glass. Keep the roller pressed against the edge of the glass with even pressure during the entire application. We also recommend the Creator's Burnisher for burnishing the foil to the glass, click here
See it in action on Youtube!